Description
This hot-pluggable transceiver is capable of transmission at 100 meters with Twisted pair cable in compliance with CAT5e and above ( shielded or unshielded ), for 1.25 GBd Ethernet.
This hot-pluggable transceiver is capable of transmission at 100 meters with Twisted pair cable in compliance with CAT5e and above ( shielded or unshielded ), for 1.25 GBd Ethernet.
This hot-pluggable transceiver is capable of transmission at 100 meters with Twisted pair cable in compliance with CAT5e and above ( shielded or unshielded ), for 1.25 GBd Ethernet.
Fiber Compatibility
Operating temperature from -40 to 85° C
The transceiver provides Class 1 eye safety by design. The eye safety circuit continuously monitors optical output power levels and will disable the transmitter and assert a TX_FAULT signal upon detecting an unsafe condition. Such unsafe conditions can be created by inputs from the host board (Vcc fluxuation, unbalanced code) or faults within the module.
The receiver section contains a loss of signal (RX_LOS) circuit to indicate when the optical input signal power is insufficient for Gigabit Ethernet compliance. A high signal indicates loss of modulated signal, indicating link failure such as a broken fiber or a failed transmitter.
The GigaCore 16Xt is a Gigabit Ethernet switch designed to cope with the most demanding lighting and AV installations. Managed through an intuitive web interface, the unit can also be configured from the front end display, making this switch a hassle-free solution for your everyday job. Four SFP cages also offer users to create complex network topologies over fiber link, such as mesh or ring. Additional available options makes the GigaCore 16Xt one of the most secured system of the industry.
Luminex GigaCore switches a pre-configured for many AV protocols including Dante, AVB Milan, AES67, Ethersound, Q-LAN, Ravenna, sACN, ArtNet etc.
The GigaCore 26i offers 26 Gigabit ports that are all connected on the front panel. Each port on the switch will have coloured mode led indications which will indicate different properties of the port such as: PoE, redundancy and group membership.
The GigaCore 14R is a Gigabit Ethernet switch designed to cope with the most demanding lighting and AV installations. Managed through a web interface, the device offers a user friendly experience with an industry specific oriented interface. Fitted with two SFP cages, the switch can support any compliant fiber transceiver, breaking the limit of copper cable run. Two power backup ports at the rear of the unit makes the switch a reliable Gigabit core for your network.
Luminex GigaCore switches a pre-configured for many AV protocols including Dante, AVB Milan, AES67, Ethersound, Q-LAN, Ravenna, sACN, ArtNet etc.
The GigaCore 12 is a managed Gigabit Ethernet switch designed to setup professional lighting and AV networks, but in a truly user friendly way. The unit offers 12 Gigabit ports on shielded Neutrik Ethercon ports, making the product a hard environment friendly device. All configurations are done through the industry oriented web interface.
Luminex GigaCore switches a pre-configured for many AV protocols including Dante, AVB Milan, AES67, Ethersound, Q-LAN, Ravenna, sACN, ArtNet etc.
GigaCore 10 with 8x EtherCon connectors
The GigaCore 10 is by far the most versatile Luminex Gigabit switch ever built. The half 19” unit with front and rear connectivity is designed to be mounted in a truss, in a rack or even on a wall. The robust metal enclosure and rugged Ethercon and (optional) Fiber connectors make this unit excel in truss mounted applications with Ethernet enabled devices, such as moving lights, PA systems, microphones, cameras or general stage connectivity. But also to ensure ultimate redundancy the GigaCore 10 is an excellent choice. Just by coupling two units, AV professionals can create a full 19” rack combination with a primary and secondary unit.
Luminex GigaCore switches a pre-configured for many AV protocols including Dante, AVB Milan, AES67, Ethersound, Q-LAN, Ravenna, sACN, ArtNet etc.
Shown with optional Neutrik OpticalCon connectors
Additional configurations available
GigaCore 10 with 8x EtherCon connectors, 2x Neutrik DUO Multi Mode Fiber, and 130W PoE
The GigaCore 10 is by far the most versatile Luminex Gigabit switch ever built. The half 19” unit with front and rear connectivity is designed to be mounted in a truss, in a rack or even on a wall. The robust metal enclosure and rugged Ethercon and (optional) Fiber connectors make this unit excel in truss mounted applications with Ethernet enabled devices, such as moving lights, PA systems, microphones, cameras or general stage connectivity. But also to ensure ultimate redundancy the GigaCore 10 is an excellent choice. Just by coupling two units, AV professionals can create a full 19” rack combination with a primary and secondary unit.
Luminex GigaCore switches a pre-configured for many AV protocols including Dante, AVB Milan, AES67, Ethersound, Q-LAN, Ravenna, sACN, ArtNet etc.
Additional configurations available
GigaCore 10 with 8x EtherCon connectors and 130W PoE
The GigaCore 10 is by far the most versatile Luminex Gigabit switch ever built. The half 19” unit with front and rear connectivity is designed to be mounted in a truss, in a rack or even on a wall. The robust metal enclosure and rugged Ethercon and (optional) Fiber connectors make this unit excel in truss mounted applications with Ethernet enabled devices, such as moving lights, PA systems, microphones, cameras or general stage connectivity. But also to ensure ultimate redundancy the GigaCore 10 is an excellent choice. Just by coupling two units, AV professionals can create a full 19” rack combination with a primary and secondary unit.
Luminex GigaCore switches a pre-configured for many AV protocols including Dante, AVB Milan, AES67, Ethersound, Q-LAN, Ravenna, sACN, ArtNet etc.
Shown with optional Neutrik OpticalCon connectors
Additional configurations available
The GigaCore 26i offers 26 Gigabit ports that are all connected on the front panel. Each port on the switch will have coloured mode led indications which will indicate different properties of the port such as: PoE, redundancy and group membership.