Audio ToolBox AVBx7/IS+r
Audio ToolBox AVBx7/IS+r

AuviTran Audio ToolBox in Installation version 19″ x 2U with 7 card slots + internal audio Matrix + Integrated redundant PSU

Audio ToolBox AVBx7/SB+r
Audio ToolBox AVBx7/SB+r

AuviTran Audio ToolBox in StageBox version 19″x2U with 7 card slots + internal audio Matrix + Integrated redundant PSU

Audio ToolBox AVB Card
Audio ToolBox AVB Card

The AxC-AVB can equally be used in AVBx3 or AVBx7 platforms. Using one slot of either ToolBox, the AxC-AVB allows to bridge them with any other network configurations.
Coupled to an AuviTran Audio ToolBox platform, AxC-AVB card provides a cost-effective gateway between AVB devices to other audio interfaces.

Audio ToolBox Dante™ Card
Audio ToolBox Dante™ Card

Just as every AxC card within the Audio ToolBox range, the AxC-DANTE can equally be used in AVBx3 or AVBx7 platforms.

Using one slot of either ToolBox, the AxC-DANTE allows to control Dante networks, but also to bridge them with other network configurations.

ToolBox AxC-MADI Card wOptical
ToolBox AxC-MADI Card wOptical

AxC-MADI offers a convenient and popular solution for transmission of up to 2×64 channels between two MADI devices. AxC-MADI card provides the AuviTran Audio ToolBox platform with a cost effective gateway to MADI connected devices.

Audio ToolBox DSP/ASRC Card
Audio ToolBox DSP/ASRC Card

AuviTran AxC-ADSP acts as an Asynchronous Sample Rate Conversion (ASRC) card or as a Digital Signal Processing card.
ASRC enables to exchange audio channels between an AxC-Card working with at different frequency or with other clock domain than the other cards.

An AxC-ADSP card enables to exchange 128 IO channels at 2 different frequencies. It is an ASRC interface between one of the AxC audio network or digital interface card and any other Audio/Network AxC cards of an AVBx3 or AVBx7.

Audio ToolBox GP I/O Card
Audio ToolBox GP I/O Card
General Purpose I/O interface card
  • 8x GPI and 8x GPO with relay
  • 1x serial interface RS232/485
  • 3x 12-pole EuroBlock connectors
ToolBox Gigabit Switch Card
ToolBox Gigabit Switch Card

AxC-SWD5G provides 8 x RJ45 Gigabit Ethernet Port, plus 2 x SFP cages for direct optical fiber connection via optional mono-mode or multimode SFP modules.

Luminex GigaCore 10
GigaCore 10

GigaCore 10 with 8x EtherCon connectors

The GigaCore 10 is by far the most versatile Luminex Gigabit switch ever built. The half 19” unit with front and rear connectivity is designed to be mounted in a truss, in a rack or even on a wall. The robust metal enclosure and rugged Ethercon and (optional) Fiber connectors make this unit excel in truss mounted applications with Ethernet enabled devices, such as moving lights, PA systems, microphones, cameras or general stage connectivity. But also to ensure ultimate redundancy the GigaCore 10 is an excellent choice. Just by coupling two units, AV professionals can create a full 19” rack combination with a primary and secondary unit.

Luminex GigaCore switches a pre-configured for many AV protocols including Dante, AVB Milan, AES67, Ethersound, Q-LAN, Ravenna, sACN, ArtNet etc.

Shown with optional Neutrik OpticalCon connectors

Additional configurations available

Luminex GigaCore 10
GigaCore 10 NDM

GigaCore 10 with 8x EtherCon connectors and 2x Neutrik DUO Multi Mode Fiber

The GigaCore 10 is by far the most versatile Luminex Gigabit switch ever built. The half 19” unit with front and rear connectivity is designed to be mounted in a truss, in a rack or even on a wall. The robust metal enclosure and rugged Ethercon and (optional) Fiber connectors make this unit excel in truss mounted applications with Ethernet enabled devices, such as moving lights, PA systems, microphones, cameras or general stage connectivity. But also to ensure ultimate redundancy the GigaCore 10 is an excellent choice. Just by coupling two units, AV professionals can create a full 19” rack combination with a primary and secondary unit.

Luminex GigaCore switches a pre-configured for many AV protocols including Dante, AVB Milan, AES67, Ethersound, Q-LAN, Ravenna, sACN, ArtNet etc.

Additional configurations available

Luminex GigaCore 10
GigaCore 10 NDS

GigaCore 10 with 8x EtherCon connectors and 2x Neutrik DUO Single Mode Fiber

The GigaCore 10 is by far the most versatile Luminex Gigabit switch ever built. The half 19” unit with front and rear connectivity is designed to be mounted in a truss, in a rack or even on a wall. The robust metal enclosure and rugged Ethercon and (optional) Fiber connectors make this unit excel in truss mounted applications with Ethernet enabled devices, such as moving lights, PA systems, microphones, cameras or general stage connectivity. But also to ensure ultimate redundancy the GigaCore 10 is an excellent choice. Just by coupling two units, AV professionals can create a full 19” rack combination with a primary and secondary unit.

Luminex GigaCore switches a pre-configured for many AV protocols including Dante, AVB Milan, AES67, Ethersound, Q-LAN, Ravenna, sACN, ArtNet etc.

Additional configurations available

Luminex GigaCore 10
GigaCore 10 PoE

GigaCore 10 with 8x EtherCon connectors and 130W PoE

The GigaCore 10 is by far the most versatile Luminex Gigabit switch ever built. The half 19” unit with front and rear connectivity is designed to be mounted in a truss, in a rack or even on a wall. The robust metal enclosure and rugged Ethercon and (optional) Fiber connectors make this unit excel in truss mounted applications with Ethernet enabled devices, such as moving lights, PA systems, microphones, cameras or general stage connectivity. But also to ensure ultimate redundancy the GigaCore 10 is an excellent choice. Just by coupling two units, AV professionals can create a full 19” rack combination with a primary and secondary unit.

Luminex GigaCore switches a pre-configured for many AV protocols including Dante, AVB Milan, AES67, Ethersound, Q-LAN, Ravenna, sACN, ArtNet etc.

Shown with optional Neutrik OpticalCon connectors

Additional configurations available

Luminex GigaCore 10
GigaCore 10 PoE NDM

GigaCore 10 with 8x EtherCon connectors, 2x Neutrik DUO Multi Mode Fiber, and 130W PoE

The GigaCore 10 is by far the most versatile Luminex Gigabit switch ever built. The half 19” unit with front and rear connectivity is designed to be mounted in a truss, in a rack or even on a wall. The robust metal enclosure and rugged Ethercon and (optional) Fiber connectors make this unit excel in truss mounted applications with Ethernet enabled devices, such as moving lights, PA systems, microphones, cameras or general stage connectivity. But also to ensure ultimate redundancy the GigaCore 10 is an excellent choice. Just by coupling two units, AV professionals can create a full 19” rack combination with a primary and secondary unit.

Luminex GigaCore switches a pre-configured for many AV protocols including Dante, AVB Milan, AES67, Ethersound, Q-LAN, Ravenna, sACN, ArtNet etc.

Additional configurations available

Luminex GigaCore 10
GigaCore 10 PoE NDS

GigaCore 10 with 8x EtherCon connectors, 2x Neutrik DUO Single Mode Fiber, and 130W PoE

The GigaCore 10 is by far the most versatile Luminex Gigabit switch ever built. The half 19” unit with front and rear connectivity is designed to be mounted in a truss, in a rack or even on a wall. The robust metal enclosure and rugged Ethercon and (optional) Fiber connectors make this unit excel in truss mounted applications with Ethernet enabled devices, such as moving lights, PA systems, microphones, cameras or general stage connectivity. But also to ensure ultimate redundancy the GigaCore 10 is an excellent choice. Just by coupling two units, AV professionals can create a full 19” rack combination with a primary and secondary unit.

Luminex GigaCore switches a pre-configured for many AV protocols including Dante, AVB Milan, AES67, Ethersound, Q-LAN, Ravenna, sACN, ArtNet etc.

Additional configurations available

GigaCore 12
GigaCore 12

The GigaCore 12 is a managed Gigabit Ethernet switch designed to setup professional lighting and AV networks, but in a truly user friendly way. The unit offers 12 Gigabit ports on shielded Neutrik Ethercon ports, making the product a hard environment friendly device. All configurations are done through the industry oriented web interface.

Luminex GigaCore switches a pre-configured for many AV protocols including Dante, AVB Milan, AES67, Ethersound, Q-LAN, Ravenna, sACN, ArtNet etc.

GigaCore 12 PoE
GigaCore 12 PoE

The GigaCore 12 is a managed Gigabit Ethernet switch designed to setup professional lighting and AV networks, but in a truly user friendly way. The unit offers 12 Gigabit ports on shielded Neutrik Ethercon ports, making the product a hard environment friendly device. All configurations are done through the industry oriented web interface.

Luminex GigaCore switches a pre-configured for many AV protocols including Dante, AVB Milan, AES67, Ethersound, Q-LAN, Ravenna, sACN, ArtNet etc.